Cruzbike Conversion Kit: The Parts for Building a Cruzbike Recumbent on Your Own Frame.

The Kit for Building your own Cruzbike Recumbent

The Cruzbike Recumbent FWD system converts a dual suspension mountain bike to recumbent using front wheel drive (FWD).

You can now have a stylish recumbent bike for less than US $700! The Cruzbike Recumbent features two 26 inch wheels, front and rear suspension, compact drive train and a comfortable riding position.

You can obtain your own y-frame mountain bike, then purchase the Cruzbike Recumbent Kit and assemble yourself using our detailed fitting instructions. We recommend you have your local bike shop look it over before you ride it. Or, you can give the kit and instructions to your local bike shop and have them do the install for you.

The conversion kit includes everything you need to easily convert an inexpensive but good quality mountain bike to a recumbent cruiser - The Cruzbike Recumbent . The conversion is based on our unique and patented front triangle and is complemented by our contoured Cruzbike Recumbent Seat

Basically, the conversion kit adds a new triangle on the front of the bike to carry the crank set. Adding this conversion kit to a y-frame mountain bike with a low cross bar for mounting the seat gives a comfortable and safe riding position. Other types of bike with a low cross bar can also be converted even if they have no suspension.

Discard that awful hard saddle, but keep everything else! :)

This simple and reversible conversion lets you use all the original bike parts, without replacement including the pedals, gears, wheels, handlebars and so on, except for the saddle. A few new pieces of framework are added to the front of the bike and carry the pedals, gears, chain etc so that they drive the front wheel. Front Wheel Drive (FWD) has come along way since being used on a penny farthing.

The Cruzbike Recumbent Seat fits onto the frame and the back is held rigid by the seat post.

At any time, the kit can be moved to another bike. And the old bike - since the conversion is FULLY reversible - can be put back just the way is was, without any fuss. The old bike can be ridden as a mountain bike again or it can be upgraded to a better bike for making another Cruzbike Recumbent. The Cruzbike Recumbent kit allows you to take advantage of huge production runs and great economies of scale.

The New Front Triangle ... Hey! It fits!

It sure does fit. The rear wheel complete with its gear cluster fits the front forks, to keep the all-important steering geometry. The head stem extension is available for threaded headsets.

To fit any rider, adjust the Cruzbike Recumbent seat, both the tilt of seat base and the tilt of the seat back can be adjusted.

There is plenty of height and reach adjustment on the handlebars.

The distance of the pedals to the seat adjusts similar to the seat post on a normal bike using the top bar of the front triangle.

The front deraileur fits, because the angle of the top bar to the chainstay is pretty well the same as on a regular bike. The rear deraileur fits into the new front dropouts whether it is a screw on type deraileur or the type with a flange that is held under the axle bolt.

Rigid Triangle, Quality Components

The drive train is solid and compact and does not flex because it is mounted on the new front triangle (actually, a tetrahedral structure). The stiff structure preserves precious pedal power.

On the Cruzbike Recumbent, the pedals and front wheel turn together when you steer. (No, turning is no problem at all - see the questions & answers.)

After a few months riding you will be able to ride no-hands. Be careful, your recumbent rider friends may envy this new skill. Front wheel drive bikes are the only recumbents that can be ridden hands free, which is great for peeling a banana, taking a photo, or just for reclining back with your hands behind your head while you watch the scenery roll past. :)

A fully reversible conversion!

When you fit the Cruzbike Recumbent Kit no permanent modification to the mountain bike is required and so the conversion can be reversed at any time. This means you you can upgrade the mountain bike you can at any time. What better way to save money and resources?

Building your own recumbent the smart way

If you have some experience of bicycle mechanics you have all the skills needed to convert a bike to a Cruzbike Recumbent, all you need is to set aside an afternoon for the task. The Cruzbike Recumbent comes with instructions that our customers say "read well and are very comprehensive".

Putting the suspension to good use

Front wheel drive benefits from suspension that helps keep the front wheel in constant and even contact with the pavement. Also, on any recumbent, suspension on the rear is helpful to protect the spine.

Bikes with dual suspension can have high-pressure tyres fitted to significantly reduce rolling resistance without creating a harsh uncomfortable ride. Dual suspension mountain bikes with a good range of gears are available at reasonable prices. With a low cross bar, the Cruzbike Recumbent Seat seat can be fitted to achieve a good centre of gravity.

The Cruzbike Recumbent places the rider at the same height as most car drivers, to promote visibility.

Steering Geometry

The rear shock absorber on a dual suspension mountain bike has some adjustment. You can use this adjustment to control the way the bike handles. If you lower the rear suspension triangle the back of the bike lifts up and this makes the steering head more verticle. Doing this will make the bike easier to ride at slow speeds.

Or, if you lower the back of the bike, you also lower the head stem and you will feel more 'fork flop' at very low speeds - but this will increase trail and give a more firm feel to the handling. It will also lower the seat in relation to the pedals to give you a more aerodynamic bike.

The Cruzbike Recumbent is a great way to express your own individual style and get a quality recumbent bike at an all time low price.